CNC LATHE
CNC Lathe DL-600 / 720 & DLB-800
Features
- The bed is adopted hi-rigidity rib structure design & coupled with hi-tensile meehanite cast-iron which is annealed treatment to eliminate internal residual stress, the bed way is high frequency heat treated, precision ground etc.,
- Three-point support on the spindle and inspected by dynamic balancing, the spindle gear is module 3 & wide, this is very suitable to do heavy duty cutting and being with 3-step speed shifting. Especially, that can output by full power even as the spindle speed at low gear, large cutting force.
- The carriage is coated with Turcite-B which provides low friction & vibration and ensures smooth movement & accuracy.
- Adopted central lubrication system which can be lubricated slide way & ball screw. The headstock is adopted forced lubricating & oil bathed combined.
- Manual tailstock coupled with 1:1 & 1/4:1 feed shifting.
- The visual window of sliding safety door is adopted the reinforced glass at inner layer and the out layer is polycarbonate, this device can be protected the failure workpieces and be hi-safety.
Specification
| ITEM | UNIT | DL-600 | DL-720 | DLB-800 |
|---|---|---|---|---|
| Working Capacity | ||||
| Swing over bed | mm | 610 | 720 | 800 |
| Swing over cross slide | mm | 360 | 460 | 540 |
| Swing over gap | mm | 790 | 900 | 980 |
| Distance between centers | mm | 1100/1600/2100 3100/4100 | 1100/1600/2100 3100/4100 | 1100/1600/2100 3100/4100 |
| Width of bed | mm | 410 | 410 | 410 |
| Headstock | ||||
| Spindle bore | mm | φ83/φ105 φ130 φ160 | φ83/φ105 φ130 φ160 | φ255 |
| Spindle nose | - | A2-8 or D1-8 A2-11 or D1-11 A2-11 | A2-8 or D1-8 A2-11 or D1-11 A2-11 | A2-15 |
| Range of spindle speed | rpm | 40-2000 40-1500 40-1000 | 40-2000 40-1500 40-1000 | 30-850 |
| Steps of spindle speed | - | 3 | 3 | 2 |
| Carriage | ||||
| Cross travel-X axis | mm | 450 | 450 | 450 |
| Longitudinal travel-Z axis | mm | 975/1475/1975 2975/3775 | 975/1475/1975 2975/3775 | 975/1475/1975 2975/3775 |
| AC servo motor | KW | X:1, Z:2 | X:1, Z:2 | X:2, Z:4 |
| Rapid feed | m/min | X:7, Z:10 X:7, Z:8 | X:7, Z:10 X:7, Z:8 | X:7, Z:10 X:7, Z:8 |
| Range of feed | mm/rev. | X/Z: 0.001-500 | X/Z: 0.001-500 | X/Z: 0.001-500 |
| Turret | ||||
| Number of tools | - | H4 / V8 | H4 / V8 | H4 / V8 |
| Tool size | mm | □25 | □25 | □25 |
| Tailstock | ||||
| Quill dia. | mm | φ80 / φ105 (opt.) | φ80 / φ105 (opt.) | φ105 |
| Quill stroke | mm | 180 | 180 | 180 |
| Tailstock taper | - | MT#5 | MT#5 | MT#5 |
| Motor | ||||
| Main spindle motor | HP | 20 / 25 (opt.) | 20 / 25 (opt.) | 30 / 40 (opt.) |
| Coolant pump motor | HP | 1 / 4 | 1 / 4 | 1 / 4 |
| Lubricating pump | HP | 1 / 16 | 1 / 16 | 1 / 16 |
| Ball screw | ||||
| X axis | - | φ25 x 5 x C5 | φ25 x 5 x C5 | φ25 x 5 x C5 |
| Z axis | - | φ50 x 10 x C5 | φ50 x 10 x C5 | φ50 x 10 x C5 |
| Controller | ||||
| CNC Controller | - | Fanuc / Mitsubishi / Siemens / Fagor / Syntec | Fanuc / Mitsubishi / Siemens / Fagor / Syntec | Fanuc / Mitsubishi / Siemens / Fagor / Syntec |
| Comtrollable axis | - | 2 | 2 | 2 |
Technical Information
