MILLING MACHINE

EM-1460G / 1660G / 2065G

Double nut-precision ball screw for X, Y and Z-axis. It keeps high precision and durability life of the machine.
X, Y, Z axis employ DC servo motors, providing variable feed speed change. Rapid feed rate offerss 2-3 times higher efficiency than frequency inverter controlled motor. Greater torque output at low-speed running. It can be fitted with an optional MPG hand wheel.
The automatic lubrication system adjusts the timing and flow to provide excellent lubricating oil onto all the sliding ways. When lubricant reaches control-limited, it rings and to remind you to fill oil.
Spindle head can change to variable head.
Spindle nose of spindle head can change to NT50#.
Available to equip with H type powerful horizontal cutting mechanism. Featuring gear head drive, servo motor drive on vertical feed, and hand wheel control for added operational convenience.

ITEM	UNIT	EM-1460G	EM-1660G	EM-2065G
TRAVEL
Longitudinal travel-X axis	mm	1400	1600	2000
Cross travel-Y axis	mm	600	650	650
Vertical travel-Z axis	mm	600 / 700 / 800 / 900	600 / 700 / 800 / 900	600 / 700 / 800 / 900
TABLE
Table size	mm	1702 x 510	1900 x 510	2450 x 580
T-slot	mm	4 x 18 x 80	4 x 18 x 80	5 x 18 x 95
Table load	kgs	1000	1000	1500
Speed feed (X,Y,Z axis)	mm/min	10-3000	10-3000	10-3000
Rapid feed (X,Y,Z axis)	mm/min	4800	4800	4800
SPINDLE
Spindle taper	-	NT#50 / BT#50	NT#50 / BT#50	NT#50 / BT#50
Quill diameter	mm	φ128.57	φ128.57	φ128.57
Spindle speed	rpm/min	60Hz 125-1100 (6-step) / 50Hz 104-1400 (6-step)	60Hz 125-1100 (6-step) / 50Hz 104-1400 (6-step)	60Hz 125-1100 (6-step) / 50Hz 104-1400 (6-step)
Spindle nose to table	mm	120-720 / 820 / 920 / 1020	120-720 / 820 / 920 / 1020	120-720 / 820 / 920 / 1020
Spindle center to column	mm	610	610	610
MOTOR
Spindle motor	mm	10HP / 2P/ 4P	10HP / 2P/ 4P	10HP / 2P/ 4P
X,Y,Z axis servo motors	Nm	4.5 Nm	4.5 Nm	4.5 Nm
Coolant pump	HP	1/8 HP	1/8 HP	1/8 HP
Net weight	kgs	4800	5000	6000